Energizer CT for Perpetual PIT

The Energizer Station CT for Perpetual PITs is the second-generation model of Pinpoint’s Energizer series. It is a unit designed specifically to “energize” or recharge the supercapacitor in a Perpetual PIT. Two PITs can beconnected at the same time, and as well as charging them the Energizer is also capable of detecting faultswith the PITS connected.

In lieu of a physical button, the Energizer CT boasts a capacitive touch pad to begin the energizing process. Asmaller enclosure has also been introduced, as well as a new system to relay the status of the PITsconnected.

To “energize” a PIT, simply connect the Energizer cable(s) to the charge point on the PIT(s). Once connected,touch the orange circle in the centre of the unit to begin the energizing process. If the LED(s) illuminate andchange from solid yellow to flashing yellow, your PITs are charging. If they then turn solid green, your PITs areready to use. If however the LEDs are still illuminated solid yellow, illuminated red or alternating between thetwo then it has encountered a fault with the PIT. Please see the Energizer CT User Manual for moreinformation about faults and contact Pinpoint for diagnostic/repair.

The Energizer Station CT is intended to sit on a desk or table near a mains power source and should be in aneasily accessible area so that staff can conveniently energize their perpetual PITs before their shift starts.